QIDI TECH PLUS4 3D Printer, 1080P Camera, 305*305*280mm, Multi-metal Composite Nozzle, New Toolhead System

QIDI TECH PLUS4 3D Printer, 1080P Camera, 305*305*280mm, Multi-metal Composite Nozzle, New Toolhead System

The QIDI Plus4 is the flagship CoreXY 3D printer featuring a revised active build chamber heating, reaching 65°C. QIDI uses a 400W heating element that reaches 65°C in just 8 minutes and distributes it evenly thanks to the air circulation fan.

The new bi-metal hotend with a 0.4mm nozzle made of hardened steel can now even reach 370°C. This is particularly advantageous for high-temperature filaments such as various nylon-carbon variants or especially PPS-CF in combination with the heated build chamber. Changing the nozzle or hotend is therefore no longer necessary.

1.Print speed up to 600 mm/s with 20000 mm/s² acceleration

2.CoreXY construction (plug & play)

3.Automatic belt tension

4.Fully automatic auto-leveling

5.5" touchscreen (800 x 480)

6.Active build space heating up to 65°C

7.Clipper ex works (including resonance compensation)

8.Activated carbon filter

9.Built-in 1080p camera

10.Supports multicolor system

305 x 305 x 280 mm build volume, 10mm guide rails, hardened steel direct drive extruder

The build space size for the Plus series has increased to 305 x 305 x 280 mm. Instead of 8mm, there are now 10mm guide rails and a 6mm thick print bed with PEI spring steel plate. QIDI uses hardened steel for the gears of the direct drive extruder (gear ratio: 8:9:1) and integrates a filament cutter. This means that an automatic loading and unloading process for filament is now available. I missed this when testing the QIDI X-MAX 3. There is also now an automatic nozzle self-cleaning function.

With the QIDI Plus4, the manufacturer has made further improvements: technically through improved active build space heating, a revised hotend, and a larger build space, but also visually! The QIDI Plus4 simply looks good. If it is just as well made and prints, this could be a big step forward for QIDI - especially if the customized Klipper software harmonizes perfectly with the Orca slicer.

QiDi Plus 4

Every Detail is Perfectly Printed

Evolutionary Highlights

Toolhead Performance Upgrade

Nozzle heats up to 370'C for high-temp printing.

Second-gen 80W bimetal hotend for advanced filament handling.

Active Chamber Heating

400W Ultra-high heating efficiency

8mins to 65C Chamber Temp

Air circulation design

Perfectly balanced chamber temperature with a powerful turbofan

Comprehensive System Upgrade

Start Control on Whatever Device You Prefer

The Open-source latest VO.12 Klipper

New Ul and software features

Machine Drive System Upgrade

Dual independent motors and 10mm linear shafts and screws.

Upgraded to a 6mm aluminum bed for enhanced flatness.

Specification